Description
Details
The HNS050MD is a light sensitive motion detector that provides automatic, hands-free switching of S-Click minute or hourly timers. When an area is in use and natural light is insufficient, the HNS050MD will trigger the timer to turn lighting on for a pre-programmed period of time. The timer is typically set to time out after 30 minutes or 1 hour.
The HNS050MD uses passive infra-red (PIR) technology to detect motion up to two metres from the sensor and acts as a light level detector to determine if the ambient light is low enough for lighting to be required. This does not prevent normal operation of the timer. If natural light is present but additional lighting is needed, the timer can be initiated with a quick tap of the button as normal.
This motion detector is designed to provide maximum power savings and has an extremely low standby power consumption of less than 100mW.
Applications and Compatibility
The HNS050MD is ideal for use in areas where natural light is periodically available, such as offices, work spaces, meeting rooms, hallways and garages. A light sensitive PIR detector is able to conserve energy in these settings by detecting the light level and only starting the timer switch when movement is detected whilst the area is dark (< 20 lux).
The HNS050MD must be used with one of the timer switches listed below. It cannot be used on its own.
- HNS410TM - Minute Timer 2-Wire
- HNS420TM - Hourly Timer 2-Wire
- HNS440TM - Minute Timer 3-Wire
- HNS450TM - Hourly Timer 3-Wire
The HNS050MD fits in standard HPM and Clipsal face plates - matching lenses included
Operating Conditions
- Operating Voltage: 220 - 240Va.c. 50Hz
- Operating Temperature: 0 to +50 degrees Celsius
- Certified Standards: CISPR15, AS/NZS 3100
- Maximum Load: As per connected S-Click Timer Switches
Note: Operation at temperature, voltage or load outside of the specifications may cause permanent damage to the unit.
The HNS050MD is to be installed as part of a fixed wire electrical installation. By law such installations must be made by an electrical contractor or similarly qualified person.
Additional Information
Additional Information
Barcode | 9318674117483 |
---|---|
Weight (kg) | 0.0400 |
Brand | S-Click |
Brand SKU | HNS050MD |
Packaging | Retail Box |
Warranty | 1 Year Warranty |